Made with a Teensy 2.0 in the Arduino IDE using the Teensyduino add-on.
The hardware set up is simple - the Nunchuck accessory end has four connections (ground, 5V, data, clock). These should be connected to Teensy power and digital pins 5 and 6 - see below for a photo.
The Teensy pinout can be found here. The Teensy should be set to MIDI mode in the Arduino IDE under Tools > MIDI Type.
The code can be downloaded here: http://milkcrate.com.au/_other/downloads/arduino/chuckMIDI/chuckMIDI.ino
0 comments:
Post a Comment