Wednesday, April 23, 2014

MIDI Controller Using Wired Wii Nunchuck

Made with a Teensy 2.0 in the Arduino IDE using the Teensyduino add-on.

The hardware set up is simple - the Nunchuck accessory end has four connections (ground, 5V, data, clock). These should be connected to Teensy power and digital pins 5 and 6 - see below for a photo.

The Teensy pinout can be found here. The Teensy should be set to MIDI mode in the Arduino IDE under Tools > MIDI Type.

The code can be downloaded here: