Showing posts with label din sync. Show all posts
Showing posts with label din sync. Show all posts

Monday, July 09, 2012

USB MIDI Clock to DIN Sync 24 Converter



This is a sketch for the Teensy. It takes a MIDI clock signal and converts it into a DIN Sync (Sync 24) signal.

The default output pins of the sketch are:

Teensy pin 11 = DIN sync start / stop
Teensy pin 12 = DIN sync shield
Teensy pin 13 = DIN sync continue
Teensy pin 14 = DIN sync clock

Download the sketch here: http://milkcrate.com.au/_other/downloads/teensy/MIDI_USB_DIN_SYNC/


Code:

int dT = 2000;

byte counter; 
byte CLOCK = 248; 
byte START = 250; 
byte CONTINUE = 251; 
byte STOP = 252; 

int sync_24_pulse_pin = 14; 
int sync_24_start_pin = 11; 
int sync_24_continue_pin = 13; 
int sync_ground = 12; 

void setup() {
  pinMode(sync_ground, OUTPUT); 
  digitalWrite(sync_ground, LOW);
  pinMode(sync_24_start_pin, OUTPUT); // Sync 24 sync pulse output
  pinMode(sync_24_continue_pin, OUTPUT); // Sync 24 sync pulse output
  
  pinMode(sync_24_start_pin, OUTPUT); // Sync 24 start / stop output
  usbMIDI.setHandleRealTimeSystem(RealTimeSystem);
  
}

void loop() {
  usbMIDI.read(); 

}

void RealTimeSystem(byte realtimebyte) {
  if(realtimebyte == CLOCK) {
    dinSync(); 
  }
  if(realtimebyte == START) {
    digitalWrite(sync_24_start_pin, HIGH); 
    digitalWrite(sync_24_continue_pin, LOW); 
  }
  if(realtimebyte == CONTINUE) {
    digitalWrite(sync_24_start_pin, HIGH); 
    digitalWrite(sync_24_continue_pin, HIGH); 
  }
  if(realtimebyte == STOP) {
    digitalWrite(sync_24_start_pin, LOW);  
    digitalWrite(sync_24_continue_pin, LOW); 
  }
}


void dinSync() {
  digitalWrite(sync_24_pulse_pin, HIGH); 
  delayMicroseconds(dT); 
  digitalWrite(sync_24_pulse_pin, LOW); 


}