View code here: https://github.com/little-scale/arduino-sketches/blob/master/esp8266-osc-sync.ino
Showing posts with label esp8266. Show all posts
Showing posts with label esp8266. Show all posts
Tuesday, May 26, 2020
Sending a Clock Signal to Modular Synth via WiFi
Sending an Ableton Live clock signal over WiFi to my modular synth using OSC, ESP8266 and Max for Live . The sync appears out of order because my DIY Exo Sequencer module doesn't have a reset input but overall the timing and tempo changes work really well - considering the setup.
View code here: https://github.com/little-scale/arduino-sketches/blob/master/esp8266-osc-sync.ino
View code here: https://github.com/little-scale/arduino-sketches/blob/master/esp8266-osc-sync.ino
Labels:
ableton live,
esp8266,
eurorack,
modular,
sync
Sunday, May 24, 2020
Using Modular Synth to Control Atem Camera Switching over WiFi using ESP8266
I've been wanting to control my camera switching from my modular synth. So I made a setup where a low to high transition on a digital input on an ESP8266 module generates an OSC message on the WiFi network for the ATEM Mini Pro switcher to change cameras. Here, it's triggered from the kick but it could be any clock, gate or trigger signal. Makes use of atemOSC.
View code here: https://github.com/little-scale/arduino-sketches/blob/master/esp8266-osc-atem-control-footswitch.ino
View code here: https://github.com/little-scale/arduino-sketches/blob/master/esp8266-osc-atem-control-footswitch.ino
Tuesday, November 07, 2017
MIDI Data Over UDP Via OSC Using An ESP8266
This is a simple example of sending MIDI data over UDP via OSC using an ESP8266. The ESP is programmed using the Arduino IDE. The Arduino ESP8266 Arduino Core is used alongside the WiFi UDP library and the OSC library for Arduino. A Max for Live UDP OSC Packet to MIDI message device receives the data within Live.
The button is pressed. The change in state (either high or low) is read by the ESP8266. A note on message is formatted, with MIDI channel 1, note 60 and a velocity that is either 127 or 0 depending on the state of the button. These three bytes are then wrapped up in an OSC message with the name "MIDI", and sent via UDP. One MIDI message is sent per OSC message, and one OSC message is sent per UPD packet.
Download the code here: http://milkcrate.com.au/_other/downloads/arduino/ESP8266_UDP_OSC_MIDI.ino
Subscribe to:
Posts (Atom)






