Tuesday, September 06, 2016

Pocket Operator USB MIDI Sync with Teensy 2


USB MIDI sync for Teensy 2 and the Pocket Operator series. Up to five units can be synchronised to MIDI a clock that is sent from a DAW such as Ableton Live.

The output from Teensy digital pins 0 - 4 is connected to the tip of the 3.5mm stereo audio jack. The ground of the Teensy is connected to the ground of the 3.5mm stereo audio jack.

The Pocket Operator should be set to SY2 sync mode (sync input / stereo audio output). Set the DAW to send MIDI clock sync out via the Teensy MIDI device. Press play on the Pocket Operator, followed by play on the DAW.

Download the code here: http://milkcrate.com.au/_other/downloads/arduino/PO_Sync.ino

0 comments: